maxon motor control
A-2
Document ID: rel7748
EPOS2 Positioning Controller
Edition: November 2017
EPOS2 24/2 Hardware Reference
© 2017 maxon motor. Subject to change without prior notice.
PLEASE READ THIS FIRST
These instructions are intended for qualified technical personnel. Prior commencing with any
activities …
• you must carefully read and understand this manual and
• you must follow the instructions given therein.
We have tried to provide you with all information necessary to install and commission the equipment in a
secure
,
safe
and
time-saving
manner. Our main focus is …
•
to familiarize you with all relevant technical aspects,
•
to let you know the easiest way of doing,
•
to alert you of any possibly dangerous situation you might encounter or that you might cause if
you do not follow the description,
•
to
write as little
and to
say as much
as possible and
•
not to bore you with things you already know.
Likewise, we tried to skip repetitive information! Thus, you will find things
mentioned just once
. If, for
example, an earlier mentioned action fits other occasions you then will be directed to that text passage
with a respective reference.
Follow any stated reference – observe respective information – then go back and continue with
the task!
P
REREQUISITES
FOR
P
ERMISSION
TO
COMMENCE
I
NSTALLATION
The EPOS2 24/2
is considered as partly completed machinery according to EU directive 2006/42/EC,
Article 2, Clause (g) and therefore
is intended to be incorporated into or assembled with other
machinery or other partly completed machinery or equipment
.
You must not put the device into service, …
• unless you have made completely sure that the other machinery – the surrounding system the device
is intended to be incorporated to – fully complies with the requirements stated in EU directive 2006/
42/EC!
• unless the surrounding system fulfills all relevant health and safety aspects!
• unless all respective interfaces have been established and fulfill the stated requirements!
