MAXIMUM Security VIP Pro, Инструкция по установке и эксплуатации

Страница: 30 / 40

30
Test procedure for vibration detection:
The required action:
Shake the detector.
If the detector fixed to a wall, bang on the
detector’s case with a screwdriver.
Compulsory reaction of the detector:
Upon every vibration detection event, the
Anti-masking Relay will be activated for 2
seconds and the Green LED indicator will
light up during that time.
Reminder
With the Remote Control RM-1, that can
be purchased separately, you can
determine that in the event of Shock or
Vibration detection, the Alarm Relay
"RELAY" will be activated instead of this
relay (Terminals "MASK"), Page 16.
The vibration detection feature is
activated only if the detector was
set to work with the Remote
Control RM-1, which can be
purchased separately.
Meaning, when DIP switch No. 2 is
in ON (See page 20).