MAXIMUM Security VIP Pro, Инструкция по установке и эксплуатации

Страница: 16 / 40

16
TERMINAL BLOCK WIRING
Terminal wiring specifications
Terminal No. 1+2
Indicated at the board as
Those are the 12V DC power supply
inputs.
Terminal No. 3+4
Indicated on the board as RELAY
Represent the contacts of the “Alarm
Relay” which normally are in closed state
(N.C.).
Upon any movement detection, the Alarm
Relay
’s contacts will change their state for
about two seconds.
You may change that time by a Remote
Control that you may purchase separately.
1 2 3 4 5 6 7 8
RELAY
MASK
TAMP
12V DC
Remark
By the Remote Control, which can
be purchased separately, you will be
able to set the alarm relay to work in
Normally Open mode (N.O.).
If you set so, the Anti-masking relay
will change its mode to Normally
Open mode (N.O.) as well.