MAXIMUM Security VIP Pro, Инструкция по установке и эксплуатации

Страница: 18 / 40

18
Highest Anti-masking sensitivity level
The highest Anti-masking sensitivity level
is obtained when the internal unit (the
electronic card) is placed at the highest
location on the case back panel.
To change the location of the internal unit,
release its locking screw located at the
bottom of case back panel. Drag the
internal unit toward its new location and
affix it there with the locking screw you
just released.
Shock and Vibration Detection
In addition to the Anti-masking alarm
provided at these terminals, these
terminals also provide Shock and
Vibration detection alarm.
Once Shock or Vibration is detected,
these relay contacts will change their state
for 2 seconds. The Orange LED indicator
will light up during this period.
Remote Control
With the Remote Control RM-1, that can
be purchased separately, you can
determine that in the event of Shock or
Vibration detection, the Alarm Relay
"RELAY" will be activated instead of this
relay (Terminals "MASK"), Page 16.