MAXIMUM Security VIP Pro, Инструкция по установке и эксплуатации

Страница: 11 / 40

11
TILT PLATES
to mount the detector on an angle
To mount (install) the detector directly on
a wall or any other flat surface and provide
the detector with a slight vertical tilt
(upwards or downwards) without using a
mounting bracket, use a tilt plate, which
will allow you to tilt the detector upwards
or downwards and thus its field-of-view
accordingly.
Use more than one tilt plate to achieve
greater vertical incline of the detector and
thus its field-of-view accordingly.
Each tilt plate tilts the detector's vertical
field-of-view by 5
0
. So if you mount the
detector by two tilt plates, the detector's
vertical field-of-view will be tilted by 10
0
.
If you mount the detector with three tilt
plates, the detector's field-of-view will be
tilted by 15
0
.