CCpilot VC
2.2
Common templates
2017-03-13
w ww.maximatecc.com
8
3.
Installation and handling
This chapter contains recommendations for installation, handling and maintenance of the device.
3.1.
Mounting
CCpilot VC has the capability to support two different mounting methods, a RAM mount or a panel
mount. These two mounting methods are described separately below.
For both fastening methods, use the appropriate M5 x 0.8 button head screw of type MRT (Torx),
length should be 12mm. The recommended torque for the screws is 1.5-2.0 Nm. Using a split ring or
toothed lock washer is recommended. Ensure the M5 mounting screws are clean and dry.
3.1.1.
RAM mount
CCpilot VC is preferably mounted using a RAM-B-238U Mount which allows adjustment of the
display’s position and angle. Screw length should be 12mm.
