CCpilot VC
2.2
Common templates
2017-03-13
w ww.maximatecc.com
19
4.6.
Error codes
The internal buzzer is used for signalling error codes when the device cannot start due to a hardware
failure. When this happens, the device will remain shut off, but indicates the failure reason by beeping
the buzzer in a special pattern. The pattern is a certain number of beeps followed by a longer pause
after which the sequence is repeated. The number of beeps is important information if the unit is sent
in for service/repair. The table below lists the different error codes.
Number of
beeps
Error code
Likely problem cause
1
errCodeReadErrEEPROM
Corrupted configuration
settings in SS FRAM.
2
errCodeWriteErrEEPROM
Corrupted configuration
settings in SS FRAM.
3
errCodeDriv erInit
SS FRAM or temp/light sensor
malfunction.
4
errCodeInternalVoltageOutOfLimits_NoBlinks
Internal v oltages is outside
allowed limits.
5
errCodeMPDoneTimeoutErr
Faulty or unprogrammed
NAND Flash (OS image) or
hardware error.
6
errCodeTimeOutWaitingForVoltages
Unstable internal v oltages.
7
errCodeTEMPOutOfLimits
Temperature sensor
malfunction or extreme
operating conditions.
10
errCodeRCCInit
SS clock crystal malfunction
or SS processor failure.
11
errCodeSSState
SS processor failure or
programming bug.
12
errCodeManageDiagnostics
Corrupted configuration
settings in SS FRAM.
13
errCodeManageActDeAct
SS processor failure or
programming bug.
14
errCodeTickTimeOutTimer
SS processor failure or
programming bug.
15
errCodeOperateModeStateError
SS processor failure or
programming bug.
16
errCodeHALIOReadErr
SS processor failure or
programming bug.
17
errCodeHALIOWriteErr
SS processor failure or
programming bug.
