CCpilot VC
2.2
Common templates
2017-03-13
w ww.maximatecc.com
25
7.
Specifications
7.1.
Technical data
Temperature specification
Operating
-25 to +70 °C
Storage
-40 to +85 °C
Kernel
Processor
32-bit ARM, Freescale i.MX537, 800 MHz
Data storage
512 MB, Industrial grade NAND flash
( Not e)
RAM memory
256 MB, DDR3
(Note) The Flash module is industrial grade classified. It has both static and dynamic w ear levelling to prevent a
premature aging and to extend the lifetime of the memory. Still it has a limited number of w rite cycles. It is
recommended that the amount of w riting to flash storage is limited within the software applications.
Power Supply
Supply Voltage
Nominal
Extreme
12 V
DC
or 24 V
DC
10* V
DC
…32 V
DC
* Dow n to 6 VDC with reduced operation (display and power
out puts automatically switched off to reduce input power)
Power Consumption
Typical operating
Max operating
Shutdown
Suspend
5-7 W
< 15 W (+ external loads)
< 120 mW
< 400 mW
Inrush current
@ 24 V
DC
input
@ 12 V
DC
input
< 1.5 A (for < 10 ms)
< 1.5 A (for < 10 ms)
External fuse recommendation
Current rating (12V/24V input)
5 A (min)*
*This assumes that the fuse is in accordance with IEC20127 i.e. can be continuously
operat ed at 100% of rated current.
Interfaces
CAN
Type
Driv er
Baud Rate
CAN ISO 11898-2, 2.0B, (High Speed CAN)
SN65HVD234
Configurable 20 – 250 kbit/s, optional up to 1 Mbit/s*
* I nternal CAN bus filters have a capacitance of 100pF (typ) as stated in the J1939 standard. This puts
limitations on the CAN bus topology conciderng bus length, number of CAN nodes etc., when running
at high bit-rates (i.e. above 250kbit/s).
USB
Type
Speed
Host port
Host and dev ice, V 2.0
Full speed, max 12 Mbit/s
5 V, max 500 mA, ov er-current and short-circuit protected.
Ethernet
Type
Isolation v oltage
According to 10BASE-T and 100BASE-TX standards
1500 V
AC
, 50/60Hz
Video In
Supported input signals
Composite v ideo, PAL(B, D, G, H, I, M, N, Nc) and NTSC(J, M, 4.43)
