4
• NEVER discharge below 2.5V per cell.
• NEVER place on combustible materials or leave unattended during charge or
discharge.
• If you crash the plane, always check if the Li-Po battery is damaged. Do NOT try to
use or charge a damaged Li-Po battery.
• ALWAYS KEEP OUT OF REACH OF CHILDREN.
PARTS LIST
Wing set in one-piece with carbon fiber leading edges
Fuselage 1 piece
Vertical Stabilizer with pre-hinged rudder
Horizontal Stabilizer with pre-hinged elevator
Motor mounts for electric and glow
Landing gear with wheels and tailskid
Fiberglass Cowl
Hardware and accessories bag
Repair bag
Other items you need to assemble this model
4 pieces HS-SG90 mini servos or equivalent (5 for a glow powered model)
12” servo extensions and 6” Y cable
.15-.21 Glow engine, 3 oz fuel tank, and prop
or
Electric outrunner motor and ESC
3 cell 1320 (or more) mAh Li-Po battery
Li-Po Battery Charger
Receiver and Transmitter
Special Features
Carbon fiber leading edge on both wings
Carbon fiber wing skids on the bottom of lower wings
Wing in one piece, all wires are pre-installed
Pre-installed pull-pull tail wires
Before you begin:
-Read the instructions completely before beginning assembly.
-Don’t work when tired. Many aircraft (including full sized ones) have crashed because of
errors made by tired builders.
-Always work in a well ventilated and lighted area.
©
2008 Maxford USA www.maxfordusa.com
4
