11
If you are using a gas engine:
The radio on/off switch can be mounted in your choic
of position. It is recommend
e
that the radio battery pack is velcroed as far forward as
ossible for cg purposes.
s
e manufacture’s
structions.
lcro strap for
ow-through cooling.
nto the fuselage.
back. It helps to turn the
ttach one nylon screw into the wing trailing edge attachment.
Do not fully tighten yet.
p
Engine Attachment
-Assemble and mount your electric
motor or glow engine/fuel tank a
provided by th
in
-For electric motors it is
recommended that the ESC be
mounted in the top of the forward
compartment with a ve
fl
Wing Attachment
-Unscrew the front cabane struts and partially lower them i
-Adjust the wings to give you as much room as possible.
-Loosen the wing wires to give you room for the cabane struts.
-Carefully slide the fuselage through the wings from the
fuselage about 30
°
and straighten it when in position.
-Temporarily insert and a
©
2008 Maxford USA www.maxfordusa.com
11
