background image

 

2

An important notice to our customers! 

 

This product is NOT a toy. Any test, flight and later flight by this product are done at your 
own risk. Please enjoy your hobby and fly safely! 

 
 

Waiver 

 
Maxford USA provides high quality, thoroughly tested model airplane kits, but ultimately 
the quality and capability of your finished model airplane depends on how you build it. 
Maxford USA can NOT in any way guarantee the performance of your finished model 
airplane. 
Maxford USA will not accept liability for personal injury, property damage, or wrongful 
death caused by negligent use of this product. 
 
 

Return Policy 

Maxford USA guarantees this kit to be free from defects in both material and 
workmanship at the date of purchase. Maxford USA has no control over the final 
assembly or material used for final assembly. All of our products are inspected in our 
factory and are checked again when shipped from our warehouse. If you think there is 
any missing part or shipping damage, please read our return policy as below. 

1.  Your order should be inspected upon delivery for any shipping damage, missing 

parts or boxes and you should contact us within 10 days from receipt if there is a 
problem. No return or exchange after 10 days. 

2.  You must call us to get a RMA# (return merchandise authorization number) 

before you send the package back to us. The RMA# must be clearly marked 
outside of the package. 

3.  The return item must be in original and good condition (NOT assembled or 

modified) with original packing material, manuals and accessories. 

4.  All shipping and insurance must be prepaid. 

5.  A 10~20% restocking fee might be charged. 

6.  No return for Li-Po batteries. 

 
 

Return Address: 

Maxford USA Corp. 
13909 Artesia Blvd. 

Cerritos, CA 90703 

Tel: 562-802-0680 

Fax: 562-802-0650 

 

©

2008 Maxford USA             www.maxfordusa.com 

2

Содержание 50" Curtis Jenny ARF

















Отзывы: