MAXDATA Workstation Fusion 7000, Руководство пользователя

Страница: 30 / 46

30 Configuration Software and Utilities
Deleting the RAID Set
If you are using a striped set, all data will be lost when you delete the RAID set. If you are using a
mirrored set, two separate copies of the data will exist, one copy on each drive.
To delete a RAID set, do the following:
1. Use the up and down arrow keys to highlight Delete RAID set. Press <Enter>.
2. When Set0 appears, press <Enter>.
3. Confirm the deletion of the RAID by pressing <Y>.
Rebuilding the Mirrored Set
If a drive is replaced, the mirrored set that the failed drive was a part of will need to be rebuilt.
1. Use the up and down arrow keys to highlight Rebuild Mirrored set. Press <Enter>.
2. Select the appropriate build option and press <Enter>:
• <online rebuild> will copy the disk now, which may take some time.
• <offline rebuild> will copy the disk in the background.
3. Confirm the mirrored set rebuild by pressing <Y>.
Resolving Conflicts

NOTE
Resolving conflicts applies only to a mirrored set configuration.
If a replacement drive has been part of a RAID array in another system, it may have conflicting drive
connection information (Primary or Secondary Master/Slave) that can prevent the RAID set from being
rebuilt or created. To prevent problems, the old drive connection information needs to be overwritten
with the new connection information as follows:
Use the up and down arrow keys to highlight Resolve Conflicts. Press <Enter>. The correct drive
information is written to the replacement drive.