MAXDATA Workstation Fusion 7000, Руководство пользователя

Страница: 24 / 46

24 Configuration Software and Utilities
Starting Setup
You can enter and start BIOS Setup under several conditions:
• When you turn on the Workstation, after POST completes the memory test
• When you have moved the CMOS jumper on the Workstation board to the “Clear CMOS”
position (enabled)
In the two conditions listed above, after rebooting, you will see this prompt:
Press <F2> to enter SETUP
In a third condition, when CMOS/NVRAM has been corrupted, you will see other prompts but not
the <F2> prompt:
Warning: CMOS checksum invalid
Warning: CMOS time and date not set
In this condition, the BIOS will load default values for CMOS and attempt to boot.
Setup Menus
Each BIOS Setup menu page contains a number of features. Except for those that are provided for
informational purposes, each feature is associated with a value field that contains user-selectable
parameters. Parameters may be changed depending upon the security option chosen. If a value is not
changeable due to insufficient security privileges (or other reasons), the feature’s value field becomes
inaccessible.
The bottom portion of the BIOS Setup screen provides a list of commands that are used for navigating
the Setup utility. Table 6 describes the keyboard commands you can use in the BIOS Setup menus.