Mattei BLADE 4 Скачать руководство пользователя

Страница: 8 / 57

1.05

TI013G0008

Machinery Directive means the 2006/42/

EC DIRECTIVE OF THE EUROPEAN

PARLIAMENT AND COUNCIL dated 17

May 2006.

Machine

Machine means the functional assembly

composed of: control unit, processing

unit, working and resting equipment,

systems (electrical, pneumatic, hydraulic,

cooling, lubrication systems) and any group

completing the system functionality.

Working area

Working area means the protected volume

limited by guards to prevent injuries and

aimed at operation during the machine

processing.

Authorized staff

Authorized staff means personnel duly

trained and appointed to perform the

activities listed below and that make up the

operating instructions for the machine.

Appointed staff

Appointed staff means the personnel who,

although not participating materially in the

work, supervise the work of others, for

example the responsible engineer.

Transport

Transport means all those operations

regarding the handling of the machinery or

part of it.

Installation

Installation means the mechanical, electrical

and

uid system integration of the machine

into a production reality, in compliance with

speci

ed requirements.

Commissioning

Commissioning means the functional check

of the machine installed.

Operation

Operation means the operating mode at

which the machine produces compressed

air according to all settings and controls

inserted by the control device.

Decommissioning

Decommissioning means to disconnect

mechanically and electrically the machine

from a production line.

Dismantling

Dismantling means dismantling and elimi-

nating the machine components.

Maintenance and repair

Maintenance and repair means the regular

check and/or replacement of parts or com-

ponents of the machine and any action to

identify the cause of failure, ending with the

machine resetting to the design operating

conditions.

Improper use

Improper use means using the machine

out of the limits speci

ed in the technical

documentation.

Applicability

The regulations should be applied when

performing following activities:

• Transport, installation and setting up

• Manual operation

• Continuous operation

• Decommissioning and dismantling

• Maintenance and repair that compose the

use procedures foreseen for the machine.

General information

Содержание BLADE 4


























































Результаты поиска

Содержание BLADE 4

Отзывы:

Похожие инструкции для BLADE 4

Бренды по названию

Популярные бренды

Mattei BLADE 4, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание BLADE 4

Отзывы:

Похожие инструкции для BLADE 4

Бренды по названию

Популярные бренды