Mattei BLADE 4, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 57

+
1.02
TI013G0008
Purpose of document
This manual includes technical
characteristics, performance, transportation
and installation rules, instructions for use,
preventive and corrective maintenance
operations of the machine manufactured
by
Ing. ENEA MATTEI S.p.A.
NOTE: This manual should be
considered an integral part of
the machine, and should stay
with it during the whole life of
the equipment.
Keep the manual and all attached
documents in a place easily accessible
to all staff in charge of the control or
maintenance of the machine.
Ing. ENEA MATTEI S.p.A. reserves the
right to subject the supply of further
copies to the repayment of charges
and to acceptance of special clauses
related to the selfdefense of intellectual
property, patent, and executive and
functional identity of the product and/or
parts of it.
It is understood that passing on all or
part of this manual to third parties is not
allowed without prior written consent of
Ing. ENEA MATTEI S.p.A., either texts, or
illustrations or diagrams.
Ing. ENEA MATTEI S.p.A. reserves the
right to make changes without prior
notice.
Any change, addition or elimination
of machine elements, components,
functions or cycles, not previously
agreed upon with Ing. ENEA MATTEI
S.p.A. releases the manufacturer from
any responsibility whatsoever.
This manual is for the machine user and
service engineer, and it aims at supplying
them with typical system technical data,
with a technical description of the various
operating groups composing the same as
well as the essential use procedures and
information needed to perform preventive
and corrective maintenance.
The manual is intended for staff with a
sound knowledge of mechanical processes,
of mechanical and electrical diagrams,
and involves both machine operators and
technical service engineers.
This manual is an integral part of the
machine and contains information that aims
at granting all staff safe working conditions
and ensuring perfect ef fi ciency during the
whole life of the machine.
For a correct use of the machine it is
assumed that the working environment
complies with current regulations
concerning safety and health.
Applied directives and technical
standards
The machine has been designed,
manufactured and tested in compliance
with the “safety and health essential
requirements” stated in attachment 1 to the
European Directive 2006/42/EC.
The list below gives the reference standards
used by
Ing. ENEA MATTEI S.p.A.
for the
design, manufacture and testing of the
machine.
List of harmonized directives and
technical standards
MACHINES DIRECTIVE 2006/42/EC
ELECTROMAGNETIC COMPATIBILITY
DIRECTIVE 2004/108/EC
LOW VOLTAGE DIRECTIVE 2006/95/EC
EN 1012-1
Compressors and Vacuum
Pumps – Safety Requirements -
Compressors.
General information