MATSONIC MS9118E Series, Руководство пользователя

Страница: 31 / 49

3: BIOS Setup Utility
CPU L1 & L2
Cache All processors that can be installed in this
mainboard use internal level 1 (L1) and
external level 2 (L2) cache memory to improve
performance. Leave this item at the default
value for better performance.
CPU L2
Cache ECC
Checking This item enables or disables ECC (Error
Correction Code) error checking on the CPU
cache memory. We recommend that you leave
this item at the default value.
Quick Power
On Self Test You can enable this item to shorten the power
on testing (POST) and have your system start
up a little faster. You might like to enable this
item after you are confident that your system
hardware is operating smoothly.
1st/2nd/3rd
Boot Device Use these three items to select the priority and
order of the devices that your system searches
for an operating system at start-up time.
Boot Other
Device If you enable this item, the system will search
all other possible locations for an operating
system if it fails to find one in the devices
specified under the first, second, and third boot
devices.
Swap Floppy
Drive If you have two floppy diskette drives in your
system, this item allows you to swap the
assigned drive letters so that drive A becomes
drive B, and drive B becomes drive A.
Boot Up
Floppy Seek If this item is enabled, it checks the geometry
of the floppy disk drives at start-up time. You
don’t need to enable this item unless you have
an old diskette drive with 360K capacity.
Boot Up
NumLock
Status This item defines if the keyboard Num Lock
key is active when your system is started.
ATA 66/100
IDE Cable
Msg. Enables or disables the display of the ATA
66/100 Cable MSG.
Typematic
Rate Setting If this item is enabled, you can use the
following two items to set the typematic rate
and the typematic delay settings for your
keyboard.
27