MATSONIC MS9118E Series, Руководство пользователя

Страница: 23 / 49

2: Mainboard Installation
LUSB1: Front panel USB headers
The mainboard has USB ports installed on the rear edge I/O port
array. Some computer cases have a special module that mounts
USB ports at the front of the case. If you have this kind of case, use
auxiliary USB connectors LUSB1 to connect the front-mounted
ports to the mainboard.
LUSB1
Pin Signal Pin Signal
1 USBVCC1 2 GND
3 USBDT2- 4 KEY
5 6
7 KEY
8 USBDT3-
9 GND 10 USBVCC1
WOL1/WOM1: Wake On LAN/Wake On Modem
If you have installed a LAN card, use the cable provided with the
card to plug into the mainboard WOL1 connector. This enables the
Wake On LAN (WOL1) feature. When your system is in a power-
saving mode, any LAN signal automatically resumes the system.
You must enable this item using the Power Management page of
the Setup Utility.
If you have installed a modem, use the cable provided with the
modem to plug into the mainboard WOM1 connector. This enables
the Wake On Modem (WOM1) feature. When your system is in a
power-saving mode, any modem signal automatically resumes the
system. You must enable this item using the Power Management
page of the Setup Utility. See Chapter 3 for more information.
WOL1
Pin Signal
1 5VSB
2 GND
3 -RING
WOM1
Pin Signal
1 5VSB
2 GND
3 -RING
19