MATSONIC MS9118E Series, Руководство пользователя

Страница: 39 / 49

3: BIOS Setup Utility
Suspend
Mode The CPU clock will be stopped and the video
signal will be suspended if no Power
Management events occur for a specified
length of time. Full power function will return
when a Power Management event is detected.
Options are from 1 Min to 1 Hour and Disable.
Video Off
Option This option defines if the video is powered
down when the system is put into suspend
mode.
Video Off
Method This item defines how the video is powered
down to save power.
Modem Use
IRQ If you want an incoming call on a modem to
automatically resume the system from a power-
saving mode, use this item to specify the
interrupt request line (IRQ) that is used by the
modem. You might have to connect the
fax/modem to the mainboard Wake On Modem
connector for this feature to work.
Soft-Off by
PWRBTN Under ACPI (Advanced Configuration and
Power management Interface) you can create
a software power down. In a software power
down, the system can be resumed by Wake Up
Alarms. This item lets you install a software
power down that is controlled by the normal
power button on your system. If the item is set
to Instant-Off, then the power button causes a
software power down. If the item is set to Delay
4 Sec. then you have to hold the power button
down for four seconds to cause a software
power down.
Run
VGABIOS if
S3 Resume This determines whether or not to enable the
system to run the VGA BIOS when resuming
from STR/S3.
PWRON After
PWR-Fail This item enables your computer to
automatically restart or return to its last
operating status after power returns from a
power failure.
IRQ/Event
Activity
Detect
This item opens a submenu to enable you to
set up events that will resume the system from
a power saving mode. You can set up
PS2KB
Wakeup Select with Hot Keys; enable or
35