Matrix S5X-04, Руководство по обслуживанию, Страница: 58 / 73

55
oNCE THE UNIT oR REPlACEMENT PART IS fUlly INSTAllED AND ASSEMblED AND
PRoPERly PlACED oN THE flooR, USE THE folloWINg INSTRUCTIoNS To TEST
THE MACHINE:
1) Check that the console is set for stepper.
a. Press and hold both LEVEL keys until Manager Mode appears on the display.
b. Press the UP or DOWN LEVEL keys until Engineering Mode appears on the display.
c. Use the UP or DOWN LEVEL keys to scroll to Machine Type.
d. Press ENTER on Machine Type and make sure it is set for S5x.
e. If Machine Type is not set for S5x, change to S5x using the UP or DOWN LEVEL key and press ENTER to save.
f. Press and hold the STOP key for 3-5 seconds to return to normal function.
2) Without hitting start or entering any program modes, step on the pedals and hold the handlebars while stepping to simulate exercising.
While moving, listen for any odd noises or squeaks.
3) After stopping movement, press the GO button and begin stepping.
4) Grasp the hand grips to check for proper heart rate response.
5) Press the level up and down buttons on the console and hand grips to make sure resistance is fully functional.
6) If everything functions properly, stop stepping (or press STOP) and the unit will reset to normal operation within 30 seconds.
9.22 TESTINg THE STEPPER
CHAPTER 9: PART REPlACEMENT gUIDE