Matrix S5X-04, Руководство по обслуживанию, Страница: 49 / 73

46
9.15 CENTER AxlE REPlACEMENT
1) Remove the shrouds as outlined in Section 9.11.
2) Loosen the 6 screws holding the generator to the frame (Figure A).
3) Loosen the nut from the tension eye bolt (Figure B).
4) Once the nut from the tension eye bolt has been removed, the generator belt can be walked off the generator pulley (Figure C).
5) Loosen the 2 eye bolts holding the center axle to the frame (Figure D).
6) Lift up on the center axle and walk the belt off of the drive pulley (Figure E).
7) This will allow you to drop the center axle out of the frame and to remove the generator belt and center axle (Figures F).
8) Test the stepper for function as outlined in Section 9.22.
fIgURE A fIgURE b
fIgURE C
fIgURE D
fIgURE f
fIgURE E
CHAPTER 9: PART REPlACEMENT gUIDE