Matrix S5X-04, Руководство по обслуживанию, Страница: 46 / 73

43
9.12 loWER CoNTRol boARD REPlACEMENT
1) Remove the right side shroud as outlined in Section 9.11.
2) Disconnect the 5 wire connections to the lower board (Figure A).
3) Remove the 2 screws holding the lower board to the frame, and remove the lower board.
4) Reverse Steps 1-3 to install a new lower board. Figure B shows the connections at the board.
5) Test the stepper for function as outlined in Section 9.22.
fIgURE A
fIgURE b
3 Pin Connector from
the Generator
2 Pin Connector
from the Filter
8 Pin Connector
from the Console
2 Pin Connector from
the AC power source
2 Pin Connector
from the Battery
CHAPTER 9: PART REPlACEMENT gUIDE