Matrix Fitness PCTV Скачать руководство пользователя страница 59

Страница: 59 / 66

SYMPtoM

CAUSE

RESoLUtIoN

All units off.

Electricity is shut off

1. Check and restore power to all PCTV

machines.

Users cannot sign in. Affects all units.

Gateway or Internet service is not connected

1. Check power and Cat-6 connections on

the Netpulse Gateway in server room or

electrical closet. Restore as needed.

2. Check power and connections to

Internet Router; reset Router (remove

power for 15 seconds, then restore) if

no activity.

3. Check PCTV machines again.

4. (If wired) Check if GREEN LED is lit

where Ethernet cable plugs into the

console.

5. If problem persists, contact Matrix

Technical Support.

One Unit. No Power to screen.

Machine unplugged or failed power cable

1. Reconnect power at outlet or PCTV

machine.

2. Contact Matrix Technical Support.

One unit will not boot up.

Unit may be broken

1. Contact Matrix Technical Support.

One unit. Can’t sign on. (

NOTE:

Check other

units for problem.)

Machine has lost connection to Gateway

1. Check all Internet connections between

machine and Gateway.

2. Reboot unit.

3. Test unit to ensure it is working.

4. Contact Matrix Technical Support.

One unit. Black screen.

Loose power connection

1. Check power connections. Check

AC power connection to wall adapter.

Check DC power connection to side

access area of console. Check DC

in-line connection between wall adapter

and treadmill pre-threaded internal

cable.

2. Shut down unit and restart unit.

3. Test unit to ensure it is working.

4. Check if RED LED is lit on front lower

corner. LED on indicates 12V is present

from the wall adapter.

5. Check that the GREEN LED is on. LED

on indicates CPU board is powered up.

Try pressing and releasing the button

on the bottom center of the console to

toggle the CPU power on function.

6. Contact Matrix Support.

Unit did not completely boot or is otherwise

unresponsive.

Console CPU is locked up

1. Press and hold the reset button on the

back of the console for 10 seconds to

force a console reboot.

If a problem with a Netpulse-compatible machine is seen, follow the directions in this troubleshooting guide to solve the problem. If the problem

cannot be resolved, call Netpulse at: 877-NETPULSE (638-7857).

tRoUBLESHootING

6.1 tRoUBLESHootING - GENERAL ISSUES

Содержание PCTV



































































Результаты поиска

Содержание PCTV

Отзывы:

Похожие инструкции для PCTV

Бренды по названию

Популярные бренды

Matrix Fitness PCTV, Руководство по обслуживанию

Результаты поиска

Содержание PCTV

Отзывы:

Похожие инструкции для PCTV

Бренды по названию

Популярные бренды