Matrix Fitness PCTV Скачать руководство пользователя страница 54

Страница: 54 / 66

After rebooting, the next screen will let a user set up the TV (Figure A).

Use Existing Configuration. If the PCTV Screen has been previously configured, choose this option to use the existing configuration. When a

user choose this option, the user bypasses the scanning process. This option is used after the PCTV Screen unit is set up and facility staff has

requested changes to the TV channels.

Download Configuration. If other units have been configured and uploaded to the server, choose this option to download the configuration.

Choosing this option bypasses the scanning process.

Analog or Digital. If this is the first PCTV Screen in the club, the user has to choose either analog or digital in order to scan the channels

available.

1) Once the correct options are chosen, touch NEXT to begin scanning.

NOTE

: Scanning the first PCTV Screen will take more time than the other units in the club. Digital scanning can take up to 15 minutes. After

scanning the first PCTV Screen, that configuration can be uploaded and downloaded to the other units being configured in the club.

FIGURE A

4.4 SEttING UP tHE PCtV

PRoGRAMMING tHE PCtV

Содержание PCTV



































































Результаты поиска

Содержание PCTV

Отзывы:

Похожие инструкции для PCTV

Бренды по названию

Популярные бренды

Matrix Fitness PCTV, Руководство по обслуживанию

Результаты поиска

Содержание PCTV

Отзывы:

Похожие инструкции для PCTV

Бренды по названию

Популярные бренды