Matrix Fitness PCTV, Руководство по обслуживанию

Страница: 15 / 66

14
3.1 PCtV BRACKEt INStALLAtIoN & CoNSoLE SEtUP - 5x tM LMM CoNSoLE - CoNtINUEd
FIGURE K
FIGURE N
FIGURE L
8) Mount the front plate to the PCTV TV using 2 screws sent with the TV bracket kit (Figure J).
9) Install the PCTV to the TV Mounting Bracket using the 4 screws shipped in the back of the PCTV (Figure K). Make sure the tabs of the front
plate slide behind the console faceplate to create a seamless look.
10) Connect the console cable from Step 1 to the console cable included with the TV Bracket kit. Use the provided adaptor to connect the coax
cable from the PCTV to the coax from the console mast. Run the coax cable to the back of the PCTV and screw it in (Figure L).
11) Plug the external TV power wire from the console mast into the TV power wire installed in step 4. Both wires are labeled TV (Figure M).
FIGURE M
12) Plug the controller wire from the TV bracket kit into the C-Safe port on the upper control board in the console (Figure N). There may be a
C-Safe cable already plugged into the console upper board, which is standard from the factory. This should be unplugged and remain unplugged
inside the console.
13) If the system is wired plug the Net Wire from Step 6 into the 8 pin connector coming up the console mast with the console cable (Figure O). If
the system is wireless, skip this step.
FIGURE o
FIGURE J
BRACKEt INStALLAtIoN & CoNSoLE SEtUP