Matica MC660, Руководство по эксплуатации

Страница: 31 / 48

77
b
Rotate the reverse knob so that the
edge of the cards is at the upper left,
and rotate the reverse feeding knob
so that this outputs as in the figure
at right.
• Jammed cards will be output from the top of the
printer, so remove these by hand.
• If the jam is cleared, then go to Step 8.
7
(If the card is in other than the reverse
section)
Rotate the feeding knob.
• Jammed cards are ejected from Card Ejection Slot
(left).
• If the jam is cleared, then go to Step 8.
• Do not turn the card feeding knob, reverse feeding
knob or reverse knob without checking the condition of
the card inside the printer.
There is a danger of parts breakage and card loss.
If the card is lost, please contact your reseller.
8
Close the Top Access Cover and Front
Cover.
• Before closing the cover, return the Card Case, decurl
section, Cleaning Roller, and Cleaning Tape Cassette
to their original positions.
9
Press the SET Key.
• The error message on the LCD Panel disappears, and
the printer returns to Normal Mode.
Secondary Transfer Section
Feeding
Knob
Operating Manual MC660
Matica Technologies