Matica MC660, Руководство по эксплуатации

Страница: 24 / 48

Full Color Card Printer
70
The Ink Ribbon has been used up.

Replace the Ink Ribbon.
→
See "Changing the Ink Ribbon and Transfer Film" on page 16 for
details about changing the Ink Ribbon.
Note

If an error occurs during the use of a YMCKK/YMCKH/
YMCKI/YMCFK ribbon, it may be because the card,
which is about to have its rear surface printed on, is fed
into the printer.
Printing will resume if you replace the ink ribbon.
However, take note that the card inside the printer will
be ejected (without printing) if the power is turned off
before replacing the ink ribbon.
The Ink Ribbon could not be detected correctly.

Reload the Ink Ribbon.
→
See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Ink Ribbon.

The Ink Ribbon set in the printer and printer settings may be different.
→
See "Ink Ribbon/Transfer Film" on page 83 about the supported types of Ink
Ribbon.
→
See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 41 for
details on how to set the Ink Ribbon type.

Ink Ribbons not supported by this printer cannot be used.
→
See "Ink Ribbon/Transfer Film" on page 83 for details about supported Ink
Ribbon.
→
Resend print data from the computer.
The Ink Ribbon could not be wound correctly.

Reload the Ink Ribbon.
→
See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Ink Ribbon.
The Ink Ribbon may be cut.

Repair the cut Ink Ribbon.
→
See "If the Ink Ribbon or Transfer Film are Cut" on page 78 for instructions on
how to repair a cut Ink Ribbon.

The Ink Ribbon set in the printer and printer settings may be different.
→
See "Ink Ribbon/Transfer Film" on page 83 about the supported types of Ink
Ribbon.
→
See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 41 for
details on how to set the Ink Ribbon type.
Error message Cause and solution
Ribbon Empty
Ribbon Type
Ribbon Wind up
Operating Manual MC660
Matica Technologies