Matica MC660, Руководство по эксплуатации

Страница: 28 / 48

Full Color Card Printer
74
After clearing an error, pressing the SET Key clears the errors, initializes the printer, and
[Ready to Print] will appear.
If the following messages appear after pressing the SET key, resolve the problem according
to the instructions below.
During operation of the IC option 2, data reception by the computer
was interrupted.

Press the SET Key.
→
Follow the directions of the application printing cards.
During operation of the external box, data reception by the
computer was interrupted.

Press the SET Key.
→
Follow the directions of the application printing cards.
Message Solution
Press the SET Key.
Load the card in the Card Case.
Correctly close the cover.
Ensure the environment temperature is 10
°
C or higher, and press the
SET Key.
Confirm that the Ink Ribbon and Transfer Film are correctly loaded.
If these are used up, then replace the Ink Ribbon or Transfer Film.
→
See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Ink Ribbon or Transfer Film.
Remove the cards by rotating the Ejection Dial.
→
See "When a Card is Jammed..." on page 75 for instructions on how to remove
cards.
Error message Cause and solution
IC2 Access Error
External Box
Push SET key
Card Empty
Cover is Open
Low Temperature
Check Ribn/Film
Remove Cards
Operating Manual MC660
Matica Technologies