manualshive.com logo in svg

Mathys balanSys REV, Хирургические техники

Поделиться
Скачать
Mathys balanSys REV Скачать руководство пользователя страница 37

balanSys REV – Extension Gap First: 3in1 – 

37

Fig. 70

Fig. 71

Fig. 72

In order to make room for the base of the stem of the 
femoral component, bone substance must be re-
moved. The reamer must be removed for this step – 
preparation of the stem base. 

Before removing the cutting block of the 3in1 system, 
two straight pins must be introduced frontally (into 
the holes with shoulders). The holes must be pre-
drilled using the drill bit (315.310). 

Then remove the cutting block of the 3in1 system: 
•  First of all remove the pins with heads
•  Then loosen the screw 
•  Then the whole cutting block assembly can  

be pulled off over the reamer

•  Lastly, remove the reamer too – with the help of 

the reamer handle (79.02.0023)

In order to enable the base of the stem to be reamed, 
the cutting block of the 3in1 system must be fitted 
back onto the straight pins (so that it will be placed in 
exactly the same position again). The cutting block of 
the 3in1 system must be secured in place with the 
lateral pins with heads in order to improve its stability.

Then introduce the reamer guide insert of the 3in1 
system (71.34.0663) into the round opening in the 
middle of the cutting block of the 3in1 system. Re-
move the bone substance with the conical reamer of 
the 3in1 system (71.34.0697). 

The exact depth to be drilled is defined by the limit 
stop of the conical reamer of the 3in1 system.

Remark

•  For a left knee, the «L» mark on the guide sleeve 

must correspond to the «Left» mark on the 
cutting block. 

•  For a right knee, the «R» mark on the guide sleeve 

must correspond to the «Right» mark on the 
cutting block. 

Then remove all the instruments.

Surgical technique

Final preparation

Содержание balanSys REV

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды