Safety
Page 4
2
Safety
Guidelines and instructions with which you must comply are summarized in this section.
Personnel who install, operate and maintain the device, must have read and understood
this operating manual.
2.1
Intended use
The front power lift should only be mounted on type JD 3036 tractors, it is used for ac-
commodating small to medium-sized implements, such as snow blades, sweepers, etc.
and should only be connected and operated with such implements. Please note that you
must avoid overloading the front axle even in heavy-duty implementation (e.g. snow re-
moval). The permissible axle load is specified in the appropriate documentation provided
by the tractor manufacturer.
Attention!
The front power lift should not be charged with downward pressure via the
tractor's hydraulic system! For implements that contact the ground or roll
on the ground in operation the tractor hydraulic system must be switched to
the float setting! Strictly comply with the manufacturer's recommendation!
The front power lift is not suitable for lifting people or for use as a work plat-
form!
In addition compliance with the service and maintenance guidelines is a component of in-
tended use. Moreover intended use includes exclusive use of original spare parts and
supplemental equipment, or use of such parts and equipment that meet the technical re-
quirements specified by the manufacturer
.
All other uses are excluded.
Non-intended use causes:
•
Health hazards for the operator or for third parties
•
Damage to the tractor and the attachments
•
Immediate invalidation of the guarantee
•
Environmental damage
To avoid accidents and reduce the risk of accidents the relevant accident prevention
regulations and the other generally acknowledged occupational health and safety and
road traffic regulations apply without limitation.
Changes to the front power lift and/or the associated accessories invalidate the guaran-
tee and exclude any liability on the part of the manufacturer for damage due to the
changes.
