Installation
Page 15
3.4.2
Attaching the control device
1.
Fasten the control device below the right fender as shown in Fig 20. To do this it is
necessary to drill an 8.5 mm bore. The position of the bore is shown in Fig 21. For
marking, we recommend using the holder as a drilling template. The other two
mounting bores are already present in the tractor fender and you do not need to
drill these bores yourself.
Fig 20: Control device, attachment position
Fig 21: Fastening the control device
2.
Connect the joystick element and the control device to the cable pulls in accor-
dance with the connection descriptions for your control device in Fig 22 or Fig 23.
Mounting bore / screw
Holder
Control device
