Installation
Page 17
A: Feed connection (hydraulic pump)
B, L: Swing
C, K: Connection for external devices (oil motor, leaf vacuum, etc.)
D, G: Front power unit (lift / lower)
E: Pressureless return (tank)
F: Pressure continuation
H: Cable pull / joystick (lift / lower)
I: Cable pull / hand lever connection with locking receptacle (for external devices)
J: Cable pull / joystick (swing)
3.4.5
Connecting the control device to the tractor hydraulic system
When mounting the control device it is connected with the connection points of the tractor
hydraulic system as shown in Fig 24.
Fig 24: Tractor hydraulic system connections
Attention!
The hydraulic pump connection is connected to the connection of the pres-
sure continuation via a passage bore. Consequently it is necessary to seal
this passage bore with a screw (spare part no. 01 000 380) before mounting
a hose to the hydraulic pump connection.
Tank
Hydraulic pump
Pressure
continuation
