Masterweld MW7500, Руководство пользователя

Страница: 6 / 54

5 IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
1.4. GLOSSARY
DEFINITION DESCRIPTION
Extraction Fan Compliance
Machine or partly-completed machine, built with Extraction fan components,
intended for use in Zone 22 and ST1 non-conductive dusts.
Filter
Pmax
It is the main filtration element, that can be of sleeve or cartridge type.
Maximum explosion pressure
Circuit breaker switch
Is a safety device able to interrupt the flow of electrical current in an electrical
circuit of an electrical system in the event of over-current.
1.5. ATTACHED DOCUMENTATION
Below is a description of the documents supplied with the machine and not present inside this manual.
• CE Declaration of conformity
• Overall and exploded assembly drawing
1.6. WARRANTY
• the packaging must be opened and the installation performed by the Manufacturer's authorised and/or
enabled technicians;
• The commissioning of the installed machine must be performed according to the instructions listed in this
manual. (For technical assistance contact MasterWeld);
• the machine must be used within the limits stated in the contract and as indicated in the technical and/or
business documentation;
• maintenance must be performed within the time and under the conditions provided by this manual, using
original spare parts of
MasterWeld and entrusting the work to qualified personnel.
The warranty becomes void in the event of:
• failure to comply with the safety standards;
• removal or tampering with the control and safety devices (guards, photocells, sensors, micro switches,
etc.);changes to the safety conditions established by the Manufacturer;
• improper use of the machine;
• use of the machine by untrained and/or unauthorised personnel, or non-compliance with the operators'
skills, as specified in the manual;
• changes or repairs made by the user without the Manufacturer's written authorisation;
• partial or total non-compliance of instructions;
• energy power supply failures (electric, compressed air, etc.);
• lack in maintenance;
• use of non-original spare parts;
• extraordinary events like floods, fires (unless caused by the machines).
The warranty does not cover :
• materials such as: oils, cartridges for filters, lubricating grease;
• parts damaged by bad or improper use, by incorrect operator intervention, by unauthorised repair and
tampering performed by the customer or by third party, or use of spare parts not supplied by
MasterWeld.