Masterweld MW7500, Руководство пользователя

Страница: 17 / 54

16
IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
3.3. MOVING THE MACHINE
Before handling the machine, check that the overall dimensions and weights required to
perform work and maintenance are without constraint. See paragraph "4.6. DESCRIPTION OF
PERIMETER AREAS" e "4.4. TECHNICAL DATA".
To handle components, proceed as follows:
• Locate the lifting pick-up points, as shown in the assembly steps, and use slings and
hooks.
• Prepare for lifting with cranes (gantry crane or forklift truck).
• Make a first, very slow lifting manoeuvre, keeping the component as close as possible to
the ground to ensure that the load is balanced.
Refer to the diagrams below for indications regarding the lifting points.
Example of lifting the complete arm.