Masterweld MW7500, Руководство пользователя

Страница: 34 / 54

33
CE Regulation use and maintenance manual
IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
4.5. SAFETY DEVICE DESCRIPTION
Sparkle separating mesh
The Extraction Fan version differs from standard MasterWeld products for the following features:
- stainless steel stiff pipes, shutter and suction hood
- anti static flexible hoses (with R<10
9
Ohm, -20°<T<90°) and conductive tubes (do not required copper braids
to connect the tube sections) .
- earthing copper braid that must be connected to the wall shelf and the earthing system of the plant where the
arm is installed.
4.6. DESCRIPTION OF PERIMETER AREAS
During installation, ensure there is sufficient space around the inspection hatch to allow it to
be opened.
For the filters' maximum encumbrances, refer to the following table.
B
A
1
3
2
90°
MEASUREMENTS
[mm] ARM RETRACTED (1) ARM EXTENDED (2) WORKING POSITION (3)
A
[mm]
1600 2000 1850
B
[mm]
2500