Masterweld MW7500, Руководство пользователя

Страница: 41 / 54

40 IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
5.2.3. Example of Extraction Fan code in environments containing gas
II 2 D
CE Mark
Explosive Products Mark
Group
(see table 1)
Category
(correlated to ZONE 2;
see table 1)
DUST
(see tabel 2)
5.2.4. Example of Extraction Fan code in dusty environments
IP65 T 200°C
Example:
PROTECTION CATEGORY (see table 6)
MAXIMUM TEMPERATURE OF THE
APPLIANCE (see table 7)
5.2.5. Extraction Fan code for Extraction Fan
II 2 G/D
5.3. DESCRIPTION OF CONTROLS
The arm can be fitted with the following commands:
•
Fan ON/OFF switch;
• Lamp ON/OFF switch;
• Air capacity regulation door (only with WING HOOD);
• Fan command board and arm radio start
5.4. WING HOOD USE
To ensure the suction effectiveness of the high-efficiency Wing hood, it must be placed 30 cm away from the
suction point.
Bigger distances will annul part of the suction and fail to ensure adequate speeds.
30 cm