MasterCraft 200V, Руководство пользователя

Страница: 59 / 146

Ignition Key Slot
(ProStar 190, ProStar 197, X-7, X-1)
MasterCraft boats come equipped
with an ignition key, which must be in-
serted in the ignition key slot and used
to activate the boat’s electrical system.
This, in turn, will allow the boat to be
started and operated.
The key will be in one of four (4) po-
sitions:
• OFF
• Accessory (including running the
stereo without the engine running)
• ON (engine is running)
• Start (turn the key to engage the
engine starter, then release to allow
the key to automatically return to
the ON position)
Never start the engine without hav-
ing first run the blower for at least four
(4) minutes.
Never leave the ignition switch in
the ON position without the engine
running, as this will cause the battery to
discharge.
GPS and
Chartplotter
All GPS and chartplotter
systems come with extensive
instruction manuals. Please
refer to these manuals or the
manufacturer’s website for de-
tails and guidance.
Navigation/Anchor
Lights Switch
(All Models)
A three-position switch serves to activate exterior lighting. Turning the switch
in the up position will activate bow and stern lights, the middle position is OFF,
and the down position is for stern-only lighting.
Ignition START-STOP
(All Models except Prostars 190, 197, X-7 and X-1)
All models so equipped will have a removable ig-
nition key. Its purpose is for safety and security. The
key should be inserted prior to starting an outing, and
removed at the conclusion. This is intended to prevent
theft or unapproved use of the boat.
The process for starting the boat is:
• Insert the key and turn. This turns ON the electrical
system and prompts the battery(ies) to provide power.
• Turn the blower ON and allow it to run for at least
four (4) minutes before starting the engine.
• Momentarily press the ENGINE START-STOP but -
ton immediately above the key.
• Momentarily press the ENGINE START-STOP but -
ton to turn OFF the engine. NOTE: This button only af-
fects the engine. The electrical system will continue to
operate as long as the key is turned. If the key is left
turned on after the outing, it will eventually run down
the battery(ies) and the engine and all systems will not
start as a result.
• At the conclusion of the outing, turn the key off
and remove from the key slot. Doing so will ensure
that you have turned OFF the electrical system, and
prevent others from starting or running the boat.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-32