MasterCraft 200V, Руководство пользователя

Страница: 93 / 146

Towers
Many MasterCraft models are now equipped with a tow-
er, whether as part of a standard package or as an optional
addition. Again, MasterCraft strongly encourages the occu-
pants of the boat to review the C
ommon Sense Approach and
the Boating Safety sections of this Owner’s Manual prior to
use of the boat and the tower component.
Occupants of the boat should never stand, sit or jump from
the tower. Nothing but MasterCraft-approved towing should
be attempted. (See
Boating Safety section of this Owner’s
Manual.)
Boat owners are strongly urged to purchase tower acces-
sories only through an authorized MasterCraft dealer. Master-
Craft has carefully determined the maximum amount of acces-
sories and total weight that the tower can safely hold. Ignoring
this information could result in injury to the boat operator and/
or passengers.
MasterCraft has determined that for the tower
utilized on the current models, the total weight of
all accessories mounted on the tower should never
exceed 85 pounds, regardless of whether the acces-
sories are MasterCraft-approved and supplied or
have come from an aftermarket supplier. Exceed-
ing this restriction can result in tower failure, which
could result in serious injury or death to the boat op-
erator and/or passengers.
Many boats are equipped with the Zft5P tower. to prop-
erly operate the tower, follow these instructions:
1. always start the tower in the lowest position.
2. Press the switch uP momentarily to move the tower to mid-point. the tow-
er will advance slowly to the position. after the tower reaches this position,
the control box will go into stand-by mode.
nOte: Whenever raising or lowering the tower, pay attention to the sur-
roundings. ensure that people and objects are never in the way. failure to do
so could result in injury or damage that is not covered under warranty.
Always ensure that there are no people nor objects in the way when
raising and lowering the tower. Individuals and their limbs may be sub-
ject to injury if caught in the path of the tower, as well as potential dam-
age to the boat, which is not covered under warranty.
3. from mid-point, the tower may be raised or lowered. By pressing the
switch uP momentarily, it will move to the top position. By pressing the
switch dOWn momentarily, it will move to the lowest position. after the
tower reaches the top or lowest position, the control box will go into stand-
by mode.
4. at any time, the tower can also be stopped by pressing the uP or dOWn
switch momentarily. the tower will remember the position and you may
start it uP or dOWn again by momentarily pressing the switch.
5. if at any time the tower stops in an unusual position, pressing the dOWn
switch momentarily will bring the tower to the lowest position and reset
the control box. normal operations will then resume.
in some instances, depending upon where the tower has stopped, it may
be necessary to press the dOWn switch a second time to reset the control box
and the tower at the lowest position.
NOTE: The tower will not move when the engine is at 800 RPM or higher.
towing, wakeboarding and other allowable activities involving the tower
should be undertaken with the tower full uP or at mid-point positions. the
mid-point setting also allows the boat to run with the tower and optional Bi-
mini tops in a lower, more aerodynamic position. for stability and to avoid
damage to the Bimini, it should be stowed prior to towing the boat on a trailer.
MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-66