MasterCraft 200V Скачать руководство пользователя страница 79

Страница: 79 / 146

Default Settings

This screen provides various fields for adjusting the values for bal

last and the smart plate. The Smart plate Crossover point also defines
the threshold for setting the automatic audio volume control.

GPS Utilities

When using a GPS device, GPS Utilities will allow the operator to

configure and monitor satellite tracking data.

Satellite Status

This feature displays a graphic indicating the satellites currently

visible in orbit and the signal strength of each satellite.

Depth and Position Setup

This feature allows the operator to define the amount of detail to

display for longitude and latitude information on the GPS map and

depth display.

Chart and Time Setup

This menu option allows the operator to set up viewing options for

the

GPS

Display.

Chart Setup Parameters.

Use the

CHECK/UNCHECK

soft key to se-

lect the information to be displayed on the GPS screen.

Time Setup Parameters

Time Setup Parameters is used to select the correct time zone and
clock mode for either 12-hour or 24-hour time formats. It is also pos

sible to enable DST (Daylight Savings time) by using the

CHECK/UN-

CHECK

soft key to select the box.

Waypoint Manager

Waypoints allow the operator to mark specific locations by lati

tude and longitude. After the waypoints are established, the Waypoint
Manger allows the operator to associate an icon with them for identi

fication. Use the

DELETE

key to delete a single waypoint, or

DELETE

ALL

to remove all of them at once.

Waypoint List displays a list of the waypoints that have been set. Use
the UP and DOWN keys to highlight the desired waypoint.

Waypoint Icon

allows the operator to assign one of four different

icons to any of the waypoints listed.

Lat/Lon

displays the latitude and longitude values for the currently

highlighted waypoint on the list.

MasterCraft 2012 Owners Manual • Guide to Individual Models • Page 2-52

Содержание 200V



















































































































































Результаты поиска

Содержание 200V

Отзывы:

Похожие инструкции для 200V

Бренды по названию

Популярные бренды

MasterCraft 200V, Руководство пользователя

Результаты поиска

Содержание 200V

Отзывы:

Похожие инструкции для 200V

Бренды по названию

Популярные бренды