Master MASTER R04 MAS4A019, Руководство пользователя

Страница: 60 / 78

60
EN
Pressing the button over 3 seconds will reset all
functional values to zero except ODO value
Maintenance and Treatment
MAINTENANCE AND CLEANING
( 1) Be sure to check all parts like all nuts, bolts, screws and frame in order to be sure that they
are tight and secure especially after you start to do the exercise . This is to assure that all
the parts are in good condition and not suffered any long-term wear that may cause the
machine break down..
(2) Periodically spray the plastic surface with cleaner to keep the dust, sweat and marks off your
unit.
(3) Periodically check the wheels under the knee bowls to ensure that they are tight and secure
and have not suffered any long term wear and tear.
Malfunctions and treatment
Advice to replace defective components immediately and/or keep the equipment out of use
until repair;
Malfunction Reason Treatment
Base is unstable.
1.
Floor is not flat or there is
small object under the front or
rear stabilizer.
2.
The rear stabilizer end caps
have not been leveled when
assembling.
1.
Remove the object.
2.
Adjust the rear stabilizer end
caps.
Handlebar or seat
cushion is shaking. The bolts and saddle post knob
are loose. Tighten the Bolts and saddle post
knob.
Loud noise from
the moving parts. The interval of the parts is
improper tighten. Open the covers to adjust.
No resistance
when riding the
upright bike.
1.
The interval of the magnetic
resistance increases.
2. Tension control is damaged.
3. Running belt slips.
4.
The bearing set is damaged.
1.
Open the covers to adjust.
2. Change the tension control.
3. Open the covers to adjust.
4.
Change the bearing set.