Master Pumps MPG7HP24, Оригинальное руководство пользователя

Страница: 9 / 28

Please select the operating location of the pump in such a manner that leaking fuel or motor oil
cannot cause any damage. When using it for ponds, basins, construction pits, watercourses or in
similar applications, the pump has to be secured against falling in.
Please inspect the pump visually prior to each use. Make sure all screws are firmly tightened, and
also check the proper condition of all connections. A defective unit or a damaged pump must not
be used. In any case of damage, the pump has to be inspected by qualified service staff.
5.2 Fuel and fuelling
Depending on the model being used, petrol
engine pumps are operated with petrol or a
petrol/oil mixture. You should never use any
fuels other than those specified in the technical
details of your product.
During fuelling, smoking is not allowed, and
please keep away open flames. Do not inhale
the vapours.
Fill the fuel tank with fresh fuel. Depending on the model being used, petrol engine pumps from
MASTER PUMPS are operated with petrol or a petrol/oil mixture. The required type of fuel is
stated in the technical details of the specific model. Please do not use fuel grades types other the
one mentioned for your product.
Do not fill in fuel while the engine is running. Stop the pump prior to each fuelling cycle and allow
at least five minutes for the unit to cool down before you start fuelling. During fuelling, the device
has to be standing upright on an even surface in order to avoid spilling or leaking of fuel. Fuelling
should only be performed in a sufficiently ventilated environment. Prior to starting the engine,
please wipe off any petrol spillage carefully.
During fuelling, smoking is not allowed, and please keep away open flames. Do not inhale the
vapors.
5.3. Motor oil
If you are using a unit with auto - lubrication, please check the
oil level prior to each use.
When topping up motor oil, smoking is not allowed, and please
keep away open flames. Do not inhale the vapors.
When using units with auto - lubrication, please check the oil level prior to each start using the