Master Pumps MPG7HP24, Оригинальное руководство пользователя

Страница: 3 / 28

1.1. Safety of work place
1. Keep your work place tidy and well lighted. Disorder or poorly lighted work places can cause
accidents.
2. Do not work with a motor driven device in an environment of flammable gas, vapor or liquids.
Motor driven devices generate sparks, which can ignite combustible dust or vapor.
3. Keep children and other persons out of reach when using this device. If distracted you might
lose the control over the device.
1.2. Safety of persons
1. Be careful, watch out what you are doing and work reasonable with a motor driven device.
Do not use a motor driven device, if you are tired, under impact of drugs, alcohol or medication. A
moment of carelessness could cause serious injuries.
2. Avoid any accidental operation. Make sure, the motor driven device is switched off, before
you pick it up or carry it.
1.3. Safety when using a combustion engine
1. Do NEVER operate an engine inside a building or in closed areas, except you make sure the
exhausting gas is transported outside completely. The motor exhausting gas contains
carbonmonoyde, which cause unconsciousness or even death.
2. Do not smoke or work near the machine.
3. Check regularly all fuel lines and tank for any leaks and cracks.
4. Switch of the engine, if the machine gets filled with fuel.
5. Do not refuel, if the machine is running or hot.
6. Do not refuel near of sparks, open fire or a smoking person.
7. Never refuel a gasoline or Diesel engine inside a room without sufficient air ventilation.
8. Do not overfill the tank and avoid to spill gasoline when refueling. Spilled gasoline or vapors
can get ignited. In case gasoline was spilled out, please make sure everything is dry before
starting the engine.
9. Make sure, the tank lid is closed correctly and tightly.
10. Under certain conditions, gasoline is easily combustible and extremely explosive.
11. Keep gasoline only in designated containers.
1.4. Maintenance safety
Regular maintenance and care reduce the danger of possible operational disruptions and increase
the life cycle of your device.
1. Make sure, the repair of the motor and machine is done by qualified personal.
2. Make sure, the motor is switched OFF and the ignition got interrupted, before the protective
devices are dismounted or removed.
3. Keep the engine clean and make sure all stickers are legible. On the stickers are important
operational instructions and warnings. Replace missing or illegible stickers.