Master Pumps MPG7HP24, Оригинальное руководство пользователя

Страница: 8 / 28

The check valve with the intake filter - i.e. the entirety of the intake section of the suction port -
must be immersed by at least 0.3 m below the surface of the liquid to be pumped. This will prevent
air from being taken in. In addition, please ensure a sufficient distance of the suction line from both
the ground and the sides of water courses, rivers, ponds etc in order to prevent stones, plants etc
from being sucked in.
4.3 Installation of the pressure line
The pressure line conveys the liquids to be discharged from the pump to the point of withdrawal.
To avoid dynamic flow losses, one should use a pressure line having at least the same diameter as
the pressure port of the pump.
4.4 Stationary installation
For stationary installation, please fasten the pump on a suitable, solid surface
5. PUTTING INTO OPERATION
5.1 Set - up and visual inspection
The exhaust gases of petrol engine pumps
contain toxic, odourless carbon monoxide
which may lead to serious health damage or, in
extreme cases, even to death when inhaled.
For the sake of the safety of people and
animals the devices must not be used in poorly
ventilated locations and in no case inside
confined spaces. Generally, please avoid any
inhalation of the exhaust gases.
Please inspect the petrol engine pump visually
each time prior to using it. A damaged unit must
not be used.
The petrol engine pump must only be operated
in flood
-
proof areas.
At every start of the pump, please make sure that the pump is set up securely and standing firmly.
The unit must always be positioned upright on an even surface. The petrol engine pump must only
be operated in flood - proof areas.