Master Chef MCFP4, Инструкция по использованию и уходу

Страница: 11 / 56

11
Shaft slightly to the right or left to ensure correct placement. You
should not be able to see the metal stem.
Place the Ejector Disc on top of the Blade Shaft BEFORE adding
3.
the Shredding or Slicing Disc. The Ejector Disc will allow the food to
bypass the Processing Bowl and eject into a container of your
choice. The Ejector Disc should placed so that the raised ridge is
facing up and the Ejector Disc is flush to the Processing Bowl.
Select the desired Shredding or Slicing Disc.
4.
Note: There are two sides to each disc: one large and one small.
The disc with the desired cut you are wanting should be placed
facing up on the Blade Shaft.
Place the Lid on the Processing Bowl with the locking extension at
5.
approximately the three o’clock position. Turn the Lid clockwise to
engage the locking tabs and the upper Interlock Mechanism (the
handle will be in the six o’clock position). Ensure that the Food
Chute Door is in the UP position so ingredients will flow through the
feed chute and into the container.
Remove the Food Pusher and insert the food to be processed into
6.
the Feed Chute (see Food Processing Hints for preparation details).
Plug the Food Processor into a 120V AC electrical outlet.
7.
Insert the Food Pusher into the Food Chute and apply 8.
slight pressure.
Note: If the Processing Bowl and the Cover are not correctly
assembled, Safety Interlock Mechanism will not be engaged and the
Food Processor will not function.
To turn the Food Processor on, Press the ON/OFF button. The unit 9.
will run continuously and the indicator light will illuminate.
PULSE FUNCTION: To Pulse, Press and hold the PULSE button to start
the processing. To stop pulsing, release the PULSE button. The
Indicator Light will illuminate each time the PULSE button is pressed.
PULSE button allows precise controls of the duration and frequency of
processing.
When the Food Chute is empty, press the ON/OFF button or 10.
release the Pulse Button (the Indicator Light will go off), and unplug
the unit. Make sure that the Blade Assembly has completely
stopped before you remove the Lid or unplug the unit. It is normal
for a small piece of unprocessed food to be left between the Slicing/
Shredding Discs and Lid.