16
16
4.8 Pendelfunktion & Kontakt K1
Für automatische Abläufe kann
zwischen K1 und GND ein
Reedkontakt geschaltet werden.
• CV 214 Sperrzeit
Wert 0 = Aus; 1...3 = nicht genutzt;
4...250 = Fahrt mit Pendelfunktion.
Der Wert gibt in 0,5 Sekundenstu-
fen eine Sperrzeit vor, wann der
Reedkontakt für die nächste Auslö-
sung wieder freigeschaltet ist.
• CV 215 Pausenzeit
Bei CV215=0 ist die Funktion de-
aktiv, bei Werten von 1..255 wird
eine entsprechende Aufenthaltszeit
in Sekunden ausgeführt. Die akti-
vierte Pausenzeit wirkt nur, wenn
während der Fahrt die Fahrtrich-
tung geändert wird.
4.9 Licht- & Funktionsausgänge
Den Lichtausgängen (LV/LH/FAx)
können je 2 Schaltbefehle (F0...
F28), eine Bedingung und ein
Dimmwert zugeordnet werden.
Sie können zusätzlich über die
„BinaryState“-Funktionen BS
29-128 geschaltet werden. Viele
Einstellungen sind kombinierbar.
Zusätzlich können auch über
den SUSI-BIDI Bus Schaltbe-
fehle empfangen werden.
4.8 Shuttle function & Contact K1
For automatic functions a
reed contact may be con-
nected to K1 and GND.
• CV 214 Blocking time
Value 0 = off, 1...3 = not used; 4
to 250 defines a shuttle operation.
This value defines the blocking
period in 0.5 sec increments. After
this time the reed contact may be
triggered again.
• CV 215 Pause Time
With CV 215=0 this function is
deactivated, values between 1
and 255 define a waiting time in
1 to 255 seconds. The activated
pausing time is executed only if the
driving direction is reversed during
operation.
4.9 Light & Function outputs
The light outputs (front/rear)
may be dimmed, assigned with
a function key address and/or a
precodition. The function outputs
can be adressed with the function
keys light (0) and 1...28. Besides
the 28 standard functions they can
be adressed with 128 „binary state“
functions. In addition a number
of functions can be combined. In
addition function commands can be
received by SUSI-BIDI commands.
Содержание eMOTION XL II
