Maserati Levante 2019, Руководство пользователя

Страница: 364 / 454

6
364
In an Emergency
Jump-Start Procedure -
Gasoline Engines
WARNING!
• Stay clear of the radiator cooling fan
whenever the hood is raised. It can
start anytime the ignition switch
is on. You could be injured by the
moving fan blades.
• Remove any metal jewelry such
as watch bands or bracelets that
might make an inadvertent electrical
contact. You could be seriously
injured.
• Do not allow the vehicles involved in
the jumpstarting operation to touch
each other as this could establish
a ground connection and cause
personal injury.
• Turn off the heater, radio, and all
unnecessary electrical accessories.
• Set the parking brake, shift the
automatic transmission into P (Park)
and turn the ignition to
OFF .
• If using another vehicle to jumpstart
the battery, park the vehicle within
the jumper cables reach and set the
parking brake and make sure the
ignition is off.
• Connect one terminal clamp of the
positive jumper cable to the positive
(
+ ) remote post of the vehicle with
the discharged battery after lifting
the protection cap of the cable
indicated on the external side of the
integrated power module.
• Connect the opposite terminal clamp
of the positive ( + ) jumper cable to
the positive ( + ) post of the booster
battery.
• Connect one terminal clamp of
the negative jumper cable to the
negative (
–
) post of the booster
battery.
• Connect the opposite terminal clamp
of the negative (
–
) jumper cable to
the remote negative (
–
) post of the
vehicle with the discharged battery as
rendered.
3.8 V8 - Gasoline
3.0 V6 - Gasoline
• Start the engine in the vehicle that
has the booster battery, let the
engine idle a few minutes, and then
start the engine in the vehicle with
the discharged battery. If using a
portable battery booster, wait a few
seconds after connecting the cables,
before starting the booster vehicle.
Once the engine is started, remove the
jumper cables in the reverse sequence.
• Disconnect the terminal clamp of
the negative (
–
) jumper cable from
the remote negative (
–
) post of the
vehicle with the discharged battery.
• Disconnect the opposite terminal
clamp of the negative jumper cable
from the negative (
–
) post of the
booster battery.
• Disconnect the terminal clamp of
the positive ( + ) jumper cable from