4
200
Dashboard Instruments and Controls
With this feature it is possible to view
and set the following modes.
•
Sync Time with GPS
Time is normally automatically
synchronised with the radio signal.
It is also possible to set automatic
synchronisation mode using GPS
signal instead.
•
Set Time Hours
With “Sync Time with GPS” feature
unchecked and this mode selected,
you can set the hours manually from
1 to 24. To select, touch the “+” or
“
–
” soft-keys to adjust the hours.
•
Set Time Minutes
With “Sync Time with GPS” feature
unchecked and this mode selected,
you can set the minutes manually
from 0 to 59. To select, touch the
“+” or “
–
” soft-keys as done for the
hours.
•
Time Format
When in this mode, you can select
the time format display. To change
the current setting, touch and release
the “12 Hrs” or “24 Hrs” soft-key.
•
Show Time In Status Bar
This feature will allow you to turn
on or shut off the digital clock in the
status bar (main menu bar).
•
Set Date in Cluster
When in this mode, you can set the
date manually in the main menu bar
of the MTC+ and on the instrument
cluster display. Touch the “+” or “-
” soft-keys to adjust day, month and
year.
Safety & Driving Assistant
Touch this soft-key to set the following
modes.
•
ParkSense (Park Assist)
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission shift
lever is in R (Reverse) and the vehicle
speed is less than 12 km/h (7.5 mph).
The system can be enabled with
“Sound” only, “Sound+Display”,
or turned “Off”. See “Park Assist
(optional)” in section “Before
Starting” for further information.
•
Front Sensors Active in Drive
If this feature is active, when driver
takes shift lever from P (Park) or N
(Neutral) to D (Drive), front parking
sensors are activated. If this feature
is not active, when driver takes shift
lever from P (Park) or N (Neutral) to D
(Drive), front parking sensors are NOT
activated.
•
Front ParkSense Volume
When this feature is selected,
the chime volume of front park
assist sensors can be set to “Low”,
“Medium” or “High” level.
“Medium” is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
•
Rear ParkSense Volume
When this feature is selected,
the chime volume of rear park
assist sensors can be set to “Low”,
“Medium” or “High” level.
“Medium” is the default setting.
Содержание Levante 2019
