Maserati Levante 2019, Руководство пользователя

Страница: 215 / 454

4
215
Dashboard Instruments and Controls
the system activates the function
for 5 minutes. The timing described
above is automatically reset and
the defrost/demisting function is
deactivated at each key-off.
CAUTION!
Failure to observe the following
cautions may cause damage to the rear
windows defroster:
•
Use care when washing the inside of
the rear window. Do not use abrasive
window cleaners on the interior
surface of the window. Use a soft
cloth and a mild washing solution,
wiping parallel to the heating
elements. Labels can be peeled off
after soaking with warm water.
• Do not use scrapers, sharp
instruments, or abrasive window
cleaners on the interior surface of the
window.
• Keep all objects inside the vehicle at
a safe distance from the window.
11. MAX A/C
By pressing the “MAX A/C” button
or the MTC+ soft-key, the system
automatically switches to get the
maximum cold air flow in both zones.
12-13 Air flow distribution modes
The airflow distribution mode,
respectively on the driver and on the
passenger zone, can be adjusted so air
comes from the dashboard vents, vents
under the dashboard in direction of
the floor, vents under the front seats
and demist/defrost vents.
The MTC+ display contains the relevant
soft-keys used to set these modes for
each zone. The climate control panel
features a single button for each zone:
press it several times to select and
set the required airflow distribution
mode.
Available settings are as follows:
•
“Floor” mode
Air for each zone comes from the
front vents, located under the
dashboard and under the front seats.
A small portion of the airflow is
directed through the defrost/demist
vents to prevent windows fogging.
• “Dashboard” mode
Air flows for each zone from four
adjustable vents of the dashboard,
two vents on the upper part of the
dashboard and two positioned at the
rear end of the central console. Each
of these vents can be singly adjusted.
The air grids or vanes of the vents can
be moved to adjust air flow direction.
A setting wheel, placed near each
vent, allows to regulate or close the
airflow.
• “Bi-Level” mode
Air for each zone comes from the
dashboard and central console
adjustable vents and the fixed
floor vents. A small portion of the
airflow is directed through the
defrost/demist vents to prevent
windows fogging.
NOTE:
Bi-Level mode is designed to let cooler
air come in the dashboard and rear
part of the central console vents and
warmer air from the floor vents.
• “Defrost” mode
Air for each zone comes from the
dashboard defrost/demist vents to
prevent windows fogging.
• “Mix” mode
Air for each zone comes from the
defrost/demist vent, the vent under
the dashboard and from floor vent.
This mode is recommended for cold
climates, to improve comfort and
prevent windows fogging.
• “Hi-Level” mode
Air for each zone comes from the
dashboard defrost/demist vents, from
the dashboard and central console
adjustable vents and the fixed floor
vents.
• “Tri-Level” mode