Maserati Levante 2019, Руководство пользователя

Страница: 284 / 454

5
284
Driving
Displayed information depends on
system status: ready, set, temporarily
cancelled or override.
Apart from the image at the centre
of the display, CC, ACC, HDC, LKA and
HAS systems status is represented by
icons at the top left and right. These
icons remain displayed even when you
exiting the "Driver Assist" screen.
The vehicle(s) and horizontal bars
represent the ACC status as ready
(white) or with sensed vehicle ahead
(green); the white, grey or yellow lines
represent the LKA and HAS systems.
The ACC screen can be displayed any
time driver changes system status
or settings. After 5 seconds of ACC
inactivity, the display goes back to last
screen.
ACC Controls and Activation
Conditions
The buttons on steering wheel L/H side
control ACC operation and the other
functions/driver assist systems installed
to this vehicle.
1. Multifunction control shared by
all driver assist functions/systems:
- Press up (indication “RES +”):
increase speed, set current speed
or resume previously set speed
when system is in “cancelled”
status.
- Pushed (indication “CANC”):
cancel the function if it was in
“set” status, going in a ready
condition but remembering the
previous set speed.
- Press down (indication “SET -”):
set speed/decrease speed.
2. Two functions button with ACC
activated:
- ACC Gap: pressed and released;
set the distance to sensed vehicle
ahead as horizontal bars (setting
cycle starts to 3 bars).
- CC On: pressed for 2 seconds
activates the CC system.
- Press it to switch from CC to ACC.
3. ACC ON/OFF button. If enabled,
pressing this button will disable
CC.
4. HAS ON/OFF button with ACC set
only . See "Highway Assist - HAS"
in this section for further details.
NOTE:
Any change made to tire dimensions
affects performance of Adaptive Cruise
Control and Front Collision Warning
(FCW), if equipped.
The ACC is not activated in the
following conditions:
• When braking.
• When parking brake is activated.
• When automatic transmission is in P
(Park), R (Reverse) or N (Neutral).
• When vehicle speed is out of preset
speed range.
• When brakes are too hot.
• When driver door is open.
• When the driver’s seat belt is
unbuckled.
• When the road is particularly steep
(both uphill and downhill) at low
speed.
• When ride height is "Off Road 1" or
“Off Road 2”, or drive mode is "OFF
ROAD".
• When drive mode (ESC OFF) is
selected.