Maserati Grecale 2022, Руководство пользователя

Страница: 65 / 324

3
63
Before Starting
CAUTION!
Do not leave the ignition device on the
ON position for a long time before a
long period of inactivity to avoid further
discharging of the battery.
With the ignition device switch ON , if
30 minutes pass with P (Park) mode
engaged and the engine stopped, the
ignition device will automatically move
to the
STOP position.
With the engine running, it is possible
to go away from the vehicle taking the
key fob with you. The engine will still
be running. The instrument cluster will
indicate with a message the absence of
the key fob on board.
For more information on the engine
start-up, see "Normal Starting of the
Engine" in section "Starting and driving".
NOTE:
• do not start the engine immediately
after reconnecting the terminals, but
press the ignition device, without
operating the pedals, to turn on the
instrument cluster and then start the
engine.
• the on the instrument cluster will
remain on, indicating that the steering
must be initialized. To do this, turn
the steering wheel from one end to
the other and bring it back to the
centre position within 30 seconds from
starting the engine. If any red warning
lights on the instrument cluster remain
lit, stop the engine, wait for at least
5 seconds and repeat the starting
procedure described above.
Shift Ignition Device to STOP Alert
If the ignition device is left in ON
position, when vehicle is locked the
system will turn off the instrument
cluster and automatically set ignition
device to
STOP after 30 minutes.
Setting the MIA system (see "Functions
of Settings Menu on MIA" in section
"Dashboard Instruments and Controls"),
radio will remain active for up to 10
minutes after the ignition device is
cycled to the
STOP position. Power
window switches and power outlet are
not affected by this function.
Illuminated Entry/Exit
Lights will turn on and off when you
enter/exit the vehicle and operate the
buttons on the key fob and/or on the
“Passive Entry” system as follows:
• If the unlock command is enabled by
pressing the specific
button on
the key fob or by the “Passive Entry”
system, the “illuminated entry” mode
will activate. Courtesy & dimmable
internal lighting, night front seats