Maserati Grecale 2022, Руководство пользователя

Страница: 142 / 324

4
140
Dashboard Instruments and Controls
Wipers and Washers
Control
The right multifunction lever controls
wiper and washer operation. This
operates only with the ignition device at
ON .
Windshield washer low fluid level is
indicated by the warning light and by a
message on the instrument cluster.
To refill the fluid, see “Maintenance
Procedures” in section “Maintenance
and Care”.
WARNING!
• Do not start the washers during the
cold months until the windshield has
warmed up. If it has not warmed up,
the liquid could freeze on the glass and
block your view.
•
Sudden loss of visibility through the
glasses could lead to a collision. You
might not see other vehicles or other
obstacles. To avoid sudden icing of the
glasses during freezing weather, warm
them with the defroster before and
during washer use.
CAUTION!
•
Never use the wipers to remove layers
of snow or ice from the glasses. In
such conditions, the windshield wiper
may be subjected to excessive stress
and the motor cut-out switch, which
prevents operation for a few seconds,
may intervene. If operation is not
subsequently restored, even after
restarting the engine, contact the
Service Network .
• In cold weather, always turn off the
wipers control and allow the wipers
to return to the park position before
turning off the engine. If the wipers
control is left on and the wipers freeze,
the wipers motor may be damaged
when the vehicle is restarted.
• Always remove any buildup of snow
that prevents the wiper blades from
returning to the off position. If the
wipers control is turned off and the
blade cannot return to the off position,
the wipers motor may be damaged.
•
Do not operate the wipers with the
blade lifted from the glasses.
• Make sure the wipers and washer
device is turned off if there is ice on the
glasses.
Operation of Control
The ring on the lever can be set to the
following positions:
windshield wiper off;
rotating the ring to the first position
activates the first sensitivity level of the
rain sensor;
rotating the ring to the second
position activates the second sensitivity
level of the rain sensor;
rotating the ring to the third position
activates the first continuous speed
level of the windshield wipers in manual
mode;
rotating the ring to the fourth position
activates the second continuous speed
level of the windshield wipers in manual
mode.